Resources
CAD Library
The HTT Tension Tie & Holdown is designed for heavy‑duty holdown applications on single or double studs and offer a solution for resisting tension loads.
E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles.
The DTT1Z Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs. It can also be utilised in horizontal applications as a tension tie to provide balustrade or similar support.
The DTT1Z Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs. It can also be utilised in horizontal applications as a tension tie to provide balustrade or similar support.
The ABU Adjustable Post Base provides a high‑strength connection between the post and concrete.
The BA Top Fix I-Joist Hanger is designed to be used where a heavy load/connector is required.
The A21 and A23 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection.
The versatile A34 and A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection.
The VPA Variable Pitch Connector is a versatile, field‑adjustable solution for connecting rafters to the wall top plate.
The TP Tie Plate joins and reinforces joints with a simple, versatile solution for a wide range of connections.
TJC is a versatile connector for jack trusses. Adjustable from 0 to 85 degree (shipped with 67.5 degree bend).
The TC Truss Connector is designed to attach trusses or rafters to the top of walls and can allow horizontal movement up to 30mm.
The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers.
The SDWS is the advanced alternative to bolting timber, or batten and coach screws, being 30% faster and 10% stronger than an equivalent batten screw.
The Strong‑Drive® SDWC Truss Screw provides a truss and rafter-to-top plate connection as well as a method to fasten stud-to-top and bottom plate.
The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm.
The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength.
The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam.
A complete line of decorative timber connectors and fasteners from Simpson Strong-Tie, you can now bring both design elegance and structural strength to your outdoor living areas.
The MASA Bottom Plate Anchor provides a time‑saving alternative to M12 and M16 cast‑in‑place anchor bolts on 45mm bottom plates.
Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.
Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed.
The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility.
The CJT Concealed Joist Tie is part of our concealed structural connector range, which combines structural strength with invisibility.
| Cover | Title | Description | Download |
|---|---|---|---|
| HTT Tension Tie & Holdown - CLT | The HTT Tension Tie & Holdown is designed for heavy‑duty holdown applications on single or double studs and offer a solution for resisting tension loads. | |
| E5 Reinforced Angle Bracket | E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. | |
| DTT1Z Tension Tie & Holdown | The DTT1Z Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs. It can also be utilised in horizontal applications as a tension tie to provide balustrade or similar support. | |
| DTT1Z Tension Tie & Holdown | The DTT1Z Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs. It can also be utilised in horizontal applications as a tension tie to provide balustrade or similar support. | |
| ABU Adjustable Post Base | The ABU Adjustable Post Base provides a high‑strength connection between the post and concrete. | |
| BA Top Fix I-Joist Hanger | The BA Top Fix I-Joist Hanger is designed to be used where a heavy load/connector is required. | |
| A21 A23 Reinforced Angle Bracket | The A21 and A23 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. | |
| A34 A35 Reinforced Angle Bracket | The versatile A34 and A35 Reinforced Angle Brackets provide a way to make a straight angle of 90° connection. | |
| VPA Variable Pitch Connector | The VPA Variable Pitch Connector is a versatile, field‑adjustable solution for connecting rafters to the wall top plate. | |
| TP Tie Plate | The TP Tie Plate joins and reinforces joints with a simple, versatile solution for a wide range of connections. | |
| TJC Jack Truss Connector | TJC is a versatile connector for jack trusses. Adjustable from 0 to 85 degree (shipped with 67.5 degree bend). | |
| TC Truss Connector | The TC Truss Connector is designed to attach trusses or rafters to the top of walls and can allow horizontal movement up to 30mm. | |
| TA Staircase Angle | The TA Staircase Angle is a heavy duty angle bracket for connecting stair treads and stringers. | |
| SDWS Timber Screw | The SDWS is the advanced alternative to bolting timber, or batten and coach screws, being 30% faster and 10% stronger than an equivalent batten screw. | |
| SDWC Truss Screw | The Strong‑Drive® SDWC Truss Screw provides a truss and rafter-to-top plate connection as well as a method to fasten stud-to-top and bottom plate. | |
| SDE Split Joist Hanger | The SDE Split Joist Hanger is a two‑piece, width‑adjustable joist hanger that can accommodate joist widths from 60mm and 120mm. | |
| SAE Face Fix Joist Hanger | The SAE Face Fix Joist Hanger is a heavy-duty hanger designed for applications requiring additional strength. | |
| RR47 Ridge Rafter Connector | The RR47 Ridge Rafter Connector provides a solid connection between rafter and ridge beam. | |
| Outdoor Accents | A complete line of decorative timber connectors and fasteners from Simpson Strong-Tie, you can now bring both design elegance and structural strength to your outdoor living areas. | |
| MASA Bottom Plate Anchor | The MASA Bottom Plate Anchor provides a time‑saving alternative to M12 and M16 cast‑in‑place anchor bolts on 45mm bottom plates. | |
| LUS Double Shear Joist Hanger | Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection. | |
| BC Post Cap | Post caps connect tops of posts to members for a secure connection and are ideal for new or retrofit applications where structural support is needed. | |
| CBT Concealed Beam Tie | The CBT Concealed Beam Tie is part of our concealed structural connector range, which combines structural strength with invisibility. | |
| CJT Concealed Joist Tie | The CJT Concealed Joist Tie is part of our concealed structural connector range, which combines structural strength with invisibility. |