S-HDU Steel Frame Heavy Duty Holdown
Select your Model:
SKU: S/HDU9
AUD$252.00per Carton
Description:
The S/HDU series of holdowns combines performance with ease of installation. The predeflected geometry virtually eliminates material stretch, resulting in low deflection under load. Installation using self-drilling tapping screws into the studs reduces installation time and saves labor cost.
Please check the Corrosion Information to see if it is suitable for your application.
Model Variants:
| SKU | Description | Unit | Carton QTY | Price AUD |
|---|---|---|---|---|
| 12-7/8IN PREDEFLECTED CFS HOLDOWN | Carton | 6 | $252.00 |
Model No Table:
|
Model No. |
H |
Fasteners |
Stud |
Stud |
LRFD Tension Load (kN) |
Deflection at LRFD Load4 (mm) |
Nominal Tension Load5 (kN) |
|
|
Anchor Hole Diameter (mm) |
Stud Fasteners |
|||||||
|
S/HDU9 |
327 |
22 |
18 - 14g |
2 |
0.75 |
49.5 |
4.8 |
58.6 |
|
2 |
0.95 |
68.9 |
6.4 |
97.0 |
||||
|
2 |
1.15 |
71.0 |
5.7 |
108.9 |
||||
|
Steel Fixture |
4.76 |
91.2 |
4.5 |
139.9 |
||||
- Designer shall specify the foundation anchor material type, length, embedment and configuration.
- Stud design by Specifier. Tabulated loads are based on a minimum stud thickness for fastener connection.
- Self-drilling tapping screws of 6.35 mm diameter can be substituted for 14g.
- Deflection at LRFD Loads includes fastener slip, holdown elongation and anchor bolt elongation (L=102mm).
- Nominal Tension Load is based on the average ultimate (peak) load from tests. AISI Lateral Design standard requires holdowns to have nominal strength to resist the lesser of the amplified seismic load or the maximum force the system can deliver.