LSSR Slopeable & Skewable Rafter Hanger
Select your Model:
SKU: LSSR1.81Z
Description:
The innovative design of the LSSR Slopeable & Skewable Rafter Hanger allows it to adjust for skew up to 45° and features an innovative hinged swivel seat to adjust for up to a 45° slope on site, eliminating the need for pre‑skewed/sloped or custom‑order hangers. One of its key features is that it can be installed after all of the rafters have been tacked into place. Now one hanger can handle a wide range of framing applications.
Model Variants:
| SKU | Description | Unit | Carton QTY | Price AUD |
|---|---|---|---|---|
| Field Adjustable Rafter Hanger | Carton | 25 | $367.50 | |
| Field Adjustable Rafter Hanger | Carton | 25 | $392.50 | |
| Field Adjustable Rafter Hanger | Carton | 25 | $525.00 |
Model No Table:
|
Model No. |
Joist Size (mm) |
Dimension (mm) |
Fasteners |
Design Capacity (kN) |
|||||
|
Width |
Height |
W |
B |
Face |
Joist |
Uplift |
Download |
||
|
Floor |
Roof |
||||||||
|
SLOPED, SKEWED or SLOPED & SKEWED HANGERS |
|||||||||
|
LSSR1.81Z |
45 |
241–356 |
46 |
108 |
14 – 64 x 3.75 |
12 – 38 x 3.75 |
3.18 |
6.04 |
6.04 |
|
LSSR2.1Z |
53 |
241–356 |
54 |
108 |
14 – 64 x 3.75 |
12 – 38 x 3.75 |
3.18 |
6.04 |
6.04 |
|
LSSR410Z |
90 |
241–356 |
92 |
130 |
20 – 64 x 3.75 |
13 – 64 x 3.75 |
4.51 |
9.41 |
9.41 |
(1). Design Capacity is the lesser of (a) the Characteristic Capacity multiplied by the Australian Capacity Factor (φ), and applicable the k modification factors following AS1720.1 and (b) the Serviceability Capacity which is the load at 3.2mm joint slip. (2). Design Capacity is the minimum of test data and structural joint calculation. (3). The Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. (4). Timber species for joint design is seasoned Radiata Pine, which is which is Australia Joint Group JD4 per AS 1720.1 Table H2.4. (5). On the acute side of the skewed LSSR hangers, fill obround holes only.