IUC Face Fix Concealed Joist Hanger

Name: IUC Face Fix Concealed Joist Hanger
Brand: Simpson Strong-Tie
SKU: iuc

Select your Model:

SKU: IUC142/ 47

AUD$0.00per Carton

Description:

The IUC Face Fix Concealed Joist Hanger is a face‑mounted concealed flange hanger on solid timber sections. Ideal for end of ledger/header or post conditions, the IUC also provides cleaner lines for exposed conditions such as overhead decks. The HUC products are heavy-duty face-mount joist hangers made from 14-gauge galvanized steel. The IUC, HUC, SAIX hangers may be installed on a masonry or concrete wall.

Please check Corrosion Information if it is suitable for your application.

Model Variants:

SKU	Description	Unit	Carton QTY	Price AUD
	IUC Face Fix Concealed Joist Hanger	Carton
	IUC Face Fix Concealed Joist Hanger	Carton

Model No Table:

Model No.	Joist size (mm)		Dimensions (mm)			Fasteners (No. – Length x Dia., mm)		Country	Design Capacity (kN)
	Width	Height	H	W	B	Face5	Joist
									Download
									Floor	Roof
IUC142/ 47	45	145-230	142	47	51	6 – 38 x 3.75	2 – 38 x 3.75	AU	k1 = 0.69	k1 = 0.77
									4.23	4.23
								NZ	k1 = 0.80	k1 = 0.80
									3.98	3.98
IUC192/ 47		195 - 200	192	47	51	10 – 38 x 3.75	2 – 38 x 3.75	AU	k1 = 0.69	k1 = 0.77
									5.32	5.32
								NZ	k1 = 0.80	k1 = 0.80
									5.32	5.32
Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2mm joint slip. Design Capacity is the minimum of test data and structural joint calculation. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1. Stainless steel connectors require stainless steel fasteners.