Simpson Strong-Tie
AccountCart

E5 Reinforced Angle Bracket

Select your Model:

SKU: E5

AUD$252.00per Carton

Description:

E5 Reinforced Angle Bracket is suitable for structural applications in framing and timber-frame houses for general connecting of timber at 90° angles. Typical applications include fixing trusses, studs, purlins, beams and posts. Suitable support materials include solid timber, composite timber, laminated timber and trusses.

Please check Corrosion Information if it is suitable for your application.

Model Variants:

SKUDescriptionUnitCarton QTYPrice AUD
ANGLE BRACKET 75MMCarton200$252.00

Model No Table:

Model No.

Dimensions (mm)

Fasteners (No. - Length x Dia., mm)

Design Capacity Nd,j (kN)

Design Capacity Nd,j (kN)

H

W

B

Top Plate

Truss/Rafter

Australia

New Zealand

Uplift (k1 = 1.14)

Uplift (k1 = 1.0)
  1. Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the Australian Capacity Factor, or the NZ Strength Reduction Factor (φ), and applicable the k modification factors following AS 1720.1 and NZS 3603 and (2) the Serviceability Capacity which is the load at 3.2 mm joint slip. Design Capacity is the minimum of test data and structural joint calculation.
  2. For Australia, the Capacity Factor (φ) is 0.85 for nails and screws for structural joints in a Category 1 application. Reduce tabulated values where other Category applications govern. For NZ, the Strength Reduction Factor (φ) is 0.80 for nails in lateral loading and 0.7 for other types of fasteners.
  3. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor (k1) where applicable. Capacities may not be increased.
  4. Timber species for joint design is seasoned Radiata Pine, which is Australia Joint Group JD4 per AS 1720.1 Table H2.4 and New Zealand Joint Group J5 per NZS 3603 Table 4.1.
  5. Simpson Strong-Tie stainless-steel connectors require stainless-steel fasteners.

E5

75

65

48

6 – SD#10 x 64mm

7 – SD#10 x 38mm

4.1

2.96

6 – SD#10 x 64mm

7 – 38 x 3.75mm

4.1

2.96