DTT1Z Tension Tie & Holdown

Name: DTT1Z Tension Tie & Holdown
Brand: Simpson Strong-Tie
SKU: dtt1z

Select your Model:

SKU: DTT1Z

AUD$256.00per Carton

Description:

Simpson Strong‑Tie offers a wide variety of holdown devices designed and tested to address many applications and load demands. The DTT1Z Tension Tie & Holdown is designed for lighter‑duty holdown applications on single or double studs. It can also be utilised in horizontal applications as a tension tie to provide balustrade or similar support. The DTT1Z is ideal for retrofit or new construction projects.

DTT1Z-KT (Timber) Kit: Includes (4) DTT1Z; (4) SDWH27800G; (24) SD#9 x 38mm
DTT1Z-KTM (Concrete) Kit: Includes (4) DTT1Z; (4) THD08140MG; (24) SD#9 x 38mm

Please check the Corrosion Information to see if it is suitable for your application.

Model Variants:

Description	Unit	Carton QTY	Price AUD
DECK TENSION TIE ZMAX	Carton	40	$256.00
DTT1Z 4 PIECE KIT W/FASTENERS	Carton	4	$208.00
DTT1Z BRACEWALL HOLDOWN KIT INC ANC/FAST	Carton

Model No Table:

Model No.	Dimensions (mm)					Fasteners		Minimum Timber Member Size (Depth x Breadth, mm)	Design Tension Capacity (kN) k1 = 1.14
	Strap Thickness	W	H	B	CL	Anchor Hole Dia (mm)	Post (Nails: No. - Length x Dia., Screws: No. - Dia. x Length, mm)
DTT1Z	2	38	181	37	19	10	6 – 40 x 3.75	90 x 38	5.0
							6 – SD#9 x 38		4.4
Design Capacity is the lesser of (1) the Characteristic Capacity multiplied by the NZ Strength Reduction Factor (φ), and applicable the k modification factors following NZS 3603 and (2) the Serviceability Capacity which is the load at 6.4mm joint slip, which includes fastener slip, anchor elongation and holdown deformation. Design Capacity is the minimum of test data and structural joint calculation. The Strength Reduction Factor (φ) is 0.80 for nails in lateral load and 0.70 for other fasteners. Duration of Load Factor (k1) is as shown. Reduce Duration of Load Factor where applicable. Capacities may not be increased. Timber species for joint design is seasoned Radiata Pine, which is New Zealand Joint Group J5 per NZS 3603 Table 4.1. The Designer must specify anchor bolt type, length and embedment. Anchor bolt nut should be finger tight plus 1/3 to 1/2 turn with a hand wrench. Care should be taken not to over-tighten the nut. Post or beam design by Designer. Posts may consist of multiple members provided they are connected independently of the holdown fasteners. Structural composite timber columns have sides that either show the wide face or the edges of the timber strands/ veneers, known as the narrow face. Simpson Strong-Tie stainless-steel connectors require stainless-steel fasteners. Values in the table reflect installation into the wide face. Holdowns and tension ties are for use in vertical or horizontal applications. Holdowns and tension ties may be installed raised up to 460mm above the top of the concrete with no load reduction, provided that additional elongation of the anchor rod is taked into account.

Technical Data - DTT1Z-KT (Timber) Bracewall Holdown Kit

Model No.	Dimensions (mm)					Fasteners		Minimum Timber Member Size (Depth x Breadth, mm)	Capacity
	Strap Thickness	W	H	B	CL	Anchor Hole Dia (mm)	Post (Nails: No. - Length x Dia., Screws: No. - Dia. x Length, mm)
DTT1Z (Holdown Bracket)	2	38	181	37	19	10	6 – SD#9 x 38	90 x 45	15kN/pair⁽²⁾
SDWH27800G (Anchor)	Size 7mm x 203mm⁽¹⁾; 3/8” Drive - Integrated Washer Head; SawTooth™ Type-17 Point; Hot Dipped Galvanised

(1) Minor diameter 7mm, major diameter 10mm.
(2) 15kN/pair installed at each end of Bracewall.

Technical Data - DTT1Z-KTM (Concrete) Bracewall Holdown Kit

Model No.	Dimensions (mm)					Fasteners		Minimum Timber Member Size (Depth x Breadth, mm)	Capacity
	Strap Thickness	W	H	B	CL	Anchor Hole Dia (mm)	Post (Nails: No. - Length x Dia., Screws: No. - Dia. x Length, mm)
DTT1Z (Holdown Bracket)	2	38	181	37	19	10	6 – SD#9 x 38	90 x 45	15kN/pair⁽¹⁾
THD08140MG (Anchor)	Size M8 x 140mm; 13mm Hex Head; Serrated Threads; Mechanically Galvanised

(1) 15kN/pair installed at each end of Bracewall.