DSV SOFTWOOD Screw (Collated & Loose)

Name: DSV SOFTWOOD Screw (Collated & Loose)
Brand: Simpson Strong-Tie
SKU: dsv

Select your Model:

SKU: DSVT2R250

AUD$243.00per Carton

Description:

The DSV screw is a powerful fastening solution for treated timber decking applications. With its under‑head nibs and fast‑start tip, the DSV is ideally suited to be driven and countersunk into today’s softwood deck boards. The shank is designed to withstand the swelling and shrinkage that is common with fast‑growth timber.

Model Variants:

Description	Unit	Carton QTY	Price AUD
50MM DSV QUIKGUARD DECK SCREW 250/BOX	Carton	6	$243.00
65MM DSV QUIKGUARD DECK SCREW 250/BOX	Carton	6	$273.00
DSV SOFTWOOD Screw (Collated & Loose)	Carton
#10 2IN DSVT QUIKGUARD TAN T25 1.5M/BOX	Carton	1	$230.00
#10 2-1/2IN DSVT QUIKGUARD TAN T25 1M	Carton	1	$235.00
#10 3IN DSVT QUIKGUARD TAN T25 1M/BOX	Carton	1	$260.00

Model No Table:

Specifications - Hand-drive

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
DSVT2R250	10G x 50mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	250	T-25, 6-lobe	BIT25T-2-RC3
DSVT212R250	10G x 65mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	250	T-25, 6-lobe	BIT25T-2-RC3

Specifications - Collated for Quik Drive^®

Model No.	Size	Thread	Point	Material & Finish	Box Qty	Drive Size	Replacement Bit
These coated fasteners possess a level of corrosion resistance that makes them suitable for use in some exterior and corrosive environments and with some preservative-treated timber. For applications in higher-exposure applications, consider Type-300 series stainless-steel fasteners for superior corrosion resistance. Bit(s) included with every box of screws. Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow board manufacturers recommendations where applicable.
DSVT2S-R600	10G x 50mm	Variable Thread Design	Type-17 with high-low threads	Carbon Steel Quik Guard^® Coating	600	T-25, 6-lobe	BITTX25-RC10
DSVT2S	10G x 50mm				1,500
DSVT212S	10G x 65mm				1,000
DSVT3S	10G x 75mm				1,000

PLEASE NOTE: Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.