CSA Connector Screw


Select your Model:

SKU: CSA5.0X40S

AUD$0.00per Carton

Description:

The CSA is a self-drilling Flat Head screw with a Type-17 Point tip suitable for installing construction connectors to timber structures. 

The CSA connector screw is developed for installing Simpson Strong-Tie connectors to timber, in order to obtain the published load bearing capacities. The conical shape under the head ensures a full contact with the connector which increases the transfer of force. A fixed connection with larger cross-bearing capacity than for standard screws is obtained. The 6 lobe recess helps to fix the screw during insertion.

Model Variants:

SKUDescriptionUnitCarton QTYPrice AUD
CSA Connector Screw (Collated & Loose)Carton
CONNECTOR SCREW 5.0X40 250PCSCarton1$40.00
5 x 40MM COLLATED SCREW 1500/BOXCarton1$468.00
CONNECTOR SCREW 5.0X50MM COLLAT 1000PCSCarton

Model No Table:

Specifications - Hand-drive Loose

Model No.

Size (mm)

Point

Material & Finish

Box Qty

Drive Size

Replacement Bit

CSA5.0X40

5 x 40

Type-17

Carbon Steel, Electro Galvanised

250

T-20, 6-lobe

BIT20T-2-R2

CSA5.0X50

5 x 50

 

Specifications - Quik Drive® Collated

Model No.

Size (mm)

Point

Material & Finish

Qty per Strip

Box Qty

Drive Size

Replacement Bit

CSA5.0X40T

5 x 40

Type-17

Carbon Steel, Electro Galvanised

25

1,500

T-20, 6-lobe

BITLTX20E-RC10

CSA5.0X50T

5 x 50

1,000

 

PLEASE NOTE:

Type 316 stainless steel provides a level of corrosion protection suitable for severe environments, especially environments with chlorides. Bit(s) included with every box of screws.

Pre-drilling and countersink may be necessary at ends, butt joints, and on applications where denser material is used. Follow the board manufacturer's recommendation where applicable. WARNINGS: Always wear PPE during installation. Corrosive environments, exposure to water, salt air, or chemicals (including some wood preservatives) may cause early failure. Click here for Corrosion Information, Important Information & General Notes.