ABS Adjustable Bearer Support

Name: ABS Adjustable Bearer Support
Brand: Simpson Strong-Tie
SKU: abs

Select your Model:

SKU: ABS70G-R8

AUD$0.00per Carton

Description:

Setting up a levelling post and bearers for the sub-structure of your deck can be tedious and time consuming, but not with Adjustable Bearer Support (ABS). ABS are suitable for use where decks are typically from 300mm to 600mm off the ground. These heights are achieved by using different height joists and bearers.

Please check the Corrosion Information to see if it is suitable for your application.

Model Variants:

SKU	Description	Unit	Carton QTY	Price AUD
	Adjustable Bearer Support.Qty 8	Carton	0

Model No Table:

Technical Data - ABS

Model No.	Bearer Width (mm)	Fasteners		Downward Design Capacity (kN)
		Anchor Dia. (mm)	Bolts Dia. (mm)
ABS70G-R8	45-100	2 - M10 x 60 (THD10060MG)	2 - M10	16.0
ABS have a download capacity of 16kN. This is approximately equivalent to 4m² of 1.5kPa floor load area The above information is a “practical” rather than an “absolute” document. There will be a number of ways to achieve the heights mentioned with different sized bearers and joists, however the installer should always be mindful to operate within the Simpson Strong-Tie product parameters and relevant joist/bearer span tables. The product has a supplied lowest height of approx 175mm. In order to achieve 160mm, the bottom 20mm of the threaded rod needs to be cut off.